Available in: Low Sheen, Semi Gloss, Matt
Ideal for all interior walls. Gloss Level 5-10%
Good for all interior walls, bathrooms, laundries and high traffic areas. Gloss Level 20-25%
Ensure surfaces to be painted are clean, dry and free of contamination. Walls should be wiped down with a mild detergent and rinsed clean with fresh water, even if they don't appear to be dirty, to ensure removal of any surface contamination and ensure the paint has a clean surface to adhere to.
Seal new or bare plaster with Taubmans Prep Right Plaster Sealer. Seal bare wallboards or Gyprock with Taubmans Ultraprep or Taubmans 3 in 1.
Remove all loose or flaking paint, wash all areas thoroughly to remove any surface contamination. Treat surfaces affected by mould with chlorine bleach diluted one part bleach to four parts water. Rinse clean with fresh water. Spot repair any bare areas such as filled holes as per directions for new work.
Apply two liberal coats by brush, roller or spray. Do not overspread. Keep brushes and rollers working freely by rinsing occasionally in clean water.
Water wash up, away from drains.
Up to 16m²/litre, depending on nature of surface. Coverage will be lower on rough or absorbent surfaces.
Recoat after 2 hours at 25°C and 50% relative humidity.
Stir paint with a 25mm wide flat stirrer in a circular lifting motion for at least 5 minutes before use. It is always recommended to stir paint before use to ensure that the colour tints are dispersed evenly throughout the paint.
Do not use at temperatures below 10°C, above 35°C or when humidity is excessive.
Taubmans Endure is guaranteed against blistering, flaking or peeling if applied on suitable and properly prepared surfaces according to printed directions. This guarantee applies to the owner of the house/property to which the paint has been applied and is available as long as the owner owns and lives in the house/property. This guarantee only applies to residential properties within Australia. This guarantee applies to defects in the manufacture or formulation of the paint and does not cover paint failure caused by factors beyond our control.
The reason why Taubmans Endure with Nanoguard® is superior to other paints is because it has small & large particles that form a strong protective barrier, providing your walls with maximum protection against household stains, mould and mildew.
It’s got everything you need for your walls to be protected:
- Superior Washability
- Stain & Scrub Resistant
- Tough & Durable
- Antibacterial Protection
- Resists Mould & Mildew
- Asthma & Allergy Friendly
That’s why it’s the paint that is Engineered to Endure™.
Taubmans Endure Interior and Taubmans EasyCoat Walls have both been approved by the National Asthma Council Australia's Sensitive Choice Program. Products approved by the Sensitive Choice Program may help people with asthma and allergies.
SCRUB TEST – 2 TIMES BETTER THAN A LEADING COMPETITOR
Laboratory testing has proven that Taubmans Endure Interior with Nanoguard has superior performance in stain and scrub resistance. Endure performs two times better than a leading competitor brand against scrubbing, and it also provides excellent protection against the growth of mould and mildew.