Endure Exterior

Maximum Protection

Most people think it's the weather that breaks down exterior paint. It's actually dirt and pollution that works its way into the surface of the paint, weakens it, and then the sun, wind and rain finish it off.

Taubmans Endure Exterior is engineered with Nanoguard that creates an interlocking molecular structure so dirt is less likely to stick and surfaces are easier to clean. It's tough, repels dirt and resists the elements such as baking heat from the sun, howling rain, and even snow, which is why it has a 15 year guarantee*.

Laboratory testing has proven that Taubmans Endure consistently outperforms the competition on dirt shedding capabilities#. By dirt not sticking to the surface, Endure provides the ideal paint for protecting your most valuable asset, your home.

# Testing has been conducted under controlled laboratory conditions using the same surfaces, cleaning agents and test methods. Click here for details.

So you don't have to devote too much of your spare time to painting, Taubmans Endure is touch dry in 30 minutes and ready for a recoat in 2 hours. It's also 100% acrylic, meaning that clean-up isn't too difficult as brushes and rollers are easily washed up in water.

Dirt Shedding Exterior

Options

Gloss	Ideal for weatherboards, trim and roofs. Gloss Level 70-75%. Not suitable for the collection of drinking water.
Low Sheen	Ideal for weatherboards, trims and roofs. Gloss Level 5-10%. Not suitable for the collection of drinking water.
Matt	Ideal for exterior walls, masonry, outdoor furniture and pergolas. Gloss Level 4%. Not suitable for the collection of drinking water.

Nick Tip #5

How to Apply

Surface Preparation	Ensure surfaces to be painted are clean, dry and free of contamination. In hot and windy conditions or when painting very absorbent surfaces, dampen the surface with water before painting.
New Work	Timber - Weathered (greyed) timber must be sanded to original timber surface. Tannin rich timbers such as cedar should be primed with Taubmans Prep Right Wood Primer or Taubmans 3 in 1 Galvanised Iron - Thoroughly degrease new surfaces. Weathered surfaces should be thoroughly cleaned before painting. For structural galvanised iron, abrade with 240# paper to remove chemical treatments and allow full adhesion. Cement Render/Concrete - Allow concrete, cement render and mortar to cure for 28 days before painting. Steel - Remove rust and prime with Taubmans Prep Right Iron and Steel Primer or White Knight Metal Primer.
Coats	Apply two liberal coats by brush, roller or spray. Do not overspread. Keep brushes and rollers working freely by rinsing occasionally in clean water.
Clean Up	Water, away from drains.
Coverage	Up to 16m²/litre, depending on nature of surface. Coverage will be lower on rough or absorbent surfaces.
Recoat	Recoat after 2 hours at 25°C and 50% relative humidity.
Stirring	Stir paint with a 25mm wide flat stirrer in a circular lifting motion for at least 5 minutes before use.
Temperature	Do not use at temperatures below 10°C, above 35°C or when humidity is excessive.