Follow Us

Follow Us

on Facebook

Go
Find a store

Find a store

Taubmans retailers in your area

Go
Endure

Endure

Engineered to endure™

Go

Easy Coat

Protection Against Mould

Taubmans Easy Coat is a quality, durable interior water based wall paint. Easycoat includes Microban which provides antimicrobial protection against the growth of mould, mildew and fungus on painted surfaces. Mould and Mildew spores circulate in the air and adhere to walls and surfaces where they grow and develop into familiar black discolorations. Microban in Taubmans Easy Coat is different, and is developed to be effective throughout the life of the paint so you can have peace of mind that your home and family are protected.

Easy Coat is especially useful for use in damp areas of the home and in rooms that suffer from high humidity, as the Microban prevents the mould and mildew spores from growing, the end result being better air quality. Taubmans Easy Coat has been accepted into the National Asthma Council Australia's Sensitive Choice Program.

Options

Easy Coat Walls
Easy Coat Ceiling Pink/White
Easy Coat Ceiling
Easy Coat Doors/Trim
Easy Coat Prep
Easy Coat Suede

 

Handy Hint #1

How to Apply

Surface Preparation Ensure surfaces to be painted are clean, dry and free of contamination. Walls should be wiped down with a mild detergent and rinsed clean with fresh water, even if they don't appear to be dirty, to ensure removal of any surface contamination and ensure the paint has a clean surface to adhere to.
New Work Seal new or bare plaster with Taubmans Prep Right Plaster Sealer. Seal bare wallboards or Gyprock with Taubmans Ultraprep or Taubmans 3 in 1.
Repaint Remove all loose or flaking paint, wash all areas thoroughly to remove any surface contamination. Treat surfaces affected by mould with chlorine bleach diluted one part bleach to four parts water. Rinse clean with fresh water. Spot repair any bare areas such as filled holes as per directions for new work.
Coats Apply two liberal coats by brush, roller or spray. Do not overspread. Keep brushes and rollers working freely by rinsing occasionally in clean water.
Clean Up Water wash up, away from drains.
Coverage Up to 16m²/litre, depending on nature of surface. Coverage will be lower on rough or absorbent surfaces.
Recoat Recoat after 2 hours at 25°C and 50% relative humidity.
Stirring Stir paint with a 25mm wide flat stirrer in a circular lifting motion for at least 5 minutes before use. It is always recommended to stir paint before use to ensure that the colour tints are dispersed evenly throughout the paint.
Temperature Do not use at temperatures below 10°C, above 35°C or when humidity is excessive.
  • Easy Coat TVCWatch the TV campaign

    view
  • Hints & Tips VideoGetting Started

    view
  • Microban

    view