Search

Endure

Follow Us

Follow Us

on Facebook

Go
Find a store

Find a store

Taubmans retailers in your area

Go
Endure

Endure

Engineered to endure™

Go

Endure Interior Doors & Trim

Maximum Protection

Taubmans Endure Doors & Trim is engineered with Nanoguard and has been specifically formulated for busy and high traffic surfaces within the home such as doors, skirting boards, architraves and window frames. Taubmans Endure Doors & Trim with Nanoguard provides superior protection against stains, repeated dusting and washing and wiping, and also protects against mould and mildew growth.

Taubmans Endure with Nanoguard has an interlocking molecular structure which creates a protective shield, meaning stains can be wiped away without compromising the quality of the paint.

You won't need to watch the paint dry! Taubmans Endure is touch dry in 30 minutes and ready for a recoat in 2 hours. It's also 100% acrylic, so it's water-based and the clean-up isn't difficult as brushes and rollers are easily washed up in water.

Options

Semi Gloss Ideal for all doors, skirting boards, windows and architraves. Gloss Level 45-50%
Gloss Ideal for all doors, skirting boards, windows and architraves. Gloss Level 80%

Nick Tip #3

Asthma

Taubmans Endure Interior has now been approved into the National Asthma Council Australia's Sensitive Choice Program.

How to Apply

Surface Preparation Ensure surfaces to be painted are clean, dry and free of contamination. Walls should be wiped down with a mild detergent and rinsed clean with fresh water, even if they don't appear to be dirty, to ensure removal of any surface contamination and ensure the paint has a clean surface to adhere to.
New Work Seal new or bare plaster with Taubmans Prep Right Plaster Sealer. Seal bare wallboards or Gyprock with Taubmans Ultraprep or Taubmans 3 in 1.
Repaint Remove all loose or flaking paint, wash all areas thoroughly to remove any surface contamination. Treat surfaces affected by mould with chlorine bleach diluted one part bleach to four parts water. Rinse clean with fresh water. Spot repair any bare areas such as filled holes as per directions for new work.
Coats Apply two liberal coats by brush, roller or spray. Do not overspread. Keep brushes and rollers working freely by rinsing occasionally in clean water.
Clean Up Water wash up, away from drains.
Coverage Up to 16m²/litre, depending on nature of surface. Coverage will be lower on rough or absorbent surfaces.
Recoat Recoat after 2 hours at 25°C and 50% relative humidity.
Stirring Stir paint with a 25mm wide flat stirrer in a circular lifting motion for at least 5 minutes before use. It is always recommended to stir paint before use to ensure that the colour tints are dispersed evenly throughout the paint.
Temperature Do not use at temperatures below 10°C, above 35°C or when humidity is excessive.

  • Taubmans Endure Interior TVCWatch the TV campaign

    view

  • Hints & Tips VideoCeiling & Trims

    view