Follow Us

Follow Us

on Facebook

Go
Find a store

Find a store

Taubmans retailers in your area

Go
Endure

Endure

Engineered to endure™

Go

Endure Interior Walls

Maximum Protection

Hallways, lounge and living room walls are amongst the busiest areas of any home, and as a result are susceptible to collecting dirt, dust, grease and finger marks. It is important that these surfaces can stand up to constant wiping, especially if you have little ones.

Taubmans Endure Interior is engineered with Nanoguard. It has an interlocking molecular structure that works to create a protective shield, so stains can be wiped away without compromising the quality of the paint or damaging the finish on your walls. It provides excellent mould and mildew protection throughout the life of the paint so you will have a cleaner and healthier home environment. This is why Taubmans Endure is the only interior paint with a 15 year guarantee*.

* Conditions apply.

Laboratory testing has proven that Taubmans Endure Interior with Nanoguard has superior performance in stain and scrub resistance. Endure performs two times better than a leading competitor brand against scrubbing, and it also provides excellent protection against the growth of mould and mildew#.

# Testing has been conducted under controlled laboratory conditions using the same surfaces, cleaning agents and test methods. Click here for details.

You won't need to watch the paint dry! Taubmans Endure is touch dry in 30 minutes and ready for a recoat in 2 hours. It's also 100% acrylic, so it's water-based and the clean-up isn't difficult as brushes and rollers are easily washed up in water.

endure_scrubtest_walls

Choice logo

See the full CHOICE test report www.choice.com.au/paint

Options

Low Sheen Ideal for all interior walls. Gloss Level 5-10%
Semi Gloss Good for all interior walls, bathrooms, laundries and high traffic areas. Gloss Level 20-25%
Matt Available soon

Nick Tip #1

How to Apply

Surface Preparation Ensure surfaces to be painted are clean, dry and free of contamination. Walls should be wiped down with a mild detergent and rinsed clean with fresh water, even if they don't appear to be dirty, to ensure removal of any surface contamination and ensure the paint has a clean surface to adhere to.
New Work Seal new or bare plaster with Taubmans Prep Right Plaster Sealer. Seal bare wallboards or Gyprock with Taubmans Ultraprep or Taubmans 3 in 1.
Repaint Remove all loose or flaking paint, wash all areas thoroughly to remove any surface contamination. Treat surfaces affected by mould with chlorine bleach diluted one part bleach to four parts water. Rinse clean with fresh water. Spot repair any bare areas such as filled holes as per directions for new work.
Coats Apply two liberal coats by brush, roller or spray. Do not overspread. Keep brushes and rollers working freely by rinsing occasionally in clean water.
Clean Up Water wash up, away from drains.
Coverage Up to 16m²/litre, depending on nature of surface. Coverage will be lower on rough or absorbent surfaces.
Recoat Recoat after 2 hours at 25°C and 50% relative humidity.
Stirring Stir paint with a 25mm wide flat stirrer in a circular lifting motion for at least 5 minutes before use. It is always recommended to stir paint before use to ensure that the colour tints are dispersed evenly throughout the paint.
Temperature Do not use at temperatures below 10°C, above 35°C or when humidity is excessive.
Semi Gloss Good for all interior walls, bathrooms, laundries and high traffic areas. Gloss Level 20-25%
  • Taubmans Endure Interior TVCWatch the TV campaign

    view
  • Hints and Tips VideoHow to Paint Gyprock

    view
  • Behind the ScenesWatch the TVC behind the scenes

    view