Follow Us

Follow Us

on Facebook

Go
Find a store

Find a store

Taubmans retailers in your area

Go
Endure

Endure

Engineered to endure™

Go

Endure Interior Kitchen & Bathroom

Maximum Protection

It is important, in any home, to maintain hygienic environments especially in the kitchen where food is prepared and in the bathroom and laundries where high humidity makes it more susceptible to mould and mildew problems. Taubmans Endure Kitchen and Bathroom with Nanoguard provides the best protection for your kitchen and bathroom as it repels stains, is resistant against repeated washing, and protects against mould and mildew growth.

Taubmans Endure with Nanoguard has an interlocking molecular structure that works to create a protective shield, meaning stains can be wiped away without damaging the finish of the paint. The walls in your home will look fresher for longer and free of mould and mildew.

You won't need to watch the paint dry! Taubmans Endure is touch dry in 30 minutes and ready for a recoat in 2 hours. It's also 100% acrylic, so it's water-based and the clean-up isn't difficult as brushes and rollers are easily washed up in water.

Ideal for kitchens, bathrooms, laundries, high traffic and wet areas, and anywhere there's high humidity. Gloss Level indicator: 10%

Nick Tip #6

How to Apply

Surface Preparation Ensure surfaces to be painted are clean, dry and free of contamination. Walls should be wiped down with a mild detergent and rinsed clean with fresh water, even if they don't appear to be dirty, to ensure removal of any surface contamination and ensure the paint has a clean surface to adhere to.
New Work Seal new or bare plaster with Taubmans Prep Right Plaster Sealer. Seal bare wallboards or Gyprock with Taubmans Ultraprep or Taubmans 3 in 1.
Repaint Remove all loose or flaking paint, wash all areas thoroughly to remove any surface contamination. Treat surfaces affected by mould with chlorine bleach diluted one part bleach to four parts water. Rinse clean with fresh water. Spot repair any bare areas such as filled holes as per directions for new work.
Coats Apply two liberal coats by brush, roller or spray. Do not overspread. Keep brushes and rollers working freely by rinsing occasionally in clean water.
Clean Up Water wash up, away from drains.
Coverage Up to 16m²/litre, depending on nature of surface. Coverage will be lower on rough or absorbent surfaces.
Recoat Recoat after 2 hours at 25°C and 50% relative humidity.
Stirring Stir paint with a 25mm wide flat stirrer in a circular lifting motion for at least 5 minutes before use. It is always recommended to stir paint before use to ensure that the colour tints are dispersed evenly throughout the paint.
Temperature Do not use at temperatures below 10°C, above 35°C or when humidity is excessive.
  • Taubmans Endure Interior TVCWatch the TV campaign

    view