Search

Interior Paints

Follow Us

Follow Us

on Facebook

Go
Colour Centre

Colour Centre

Brushouts and tools

Go
Endure

Endure

Engineered to endure™

Go

One Coat Ceiling

One Coat Protection

Taubmans One Coat Ceiling is a low odour paint suitable for ceilings where a durable, flat finish is required. It contains Microban so it's particularly good for rooms that experience high humidity or rooms prone to mould, mildew and bacteria growth. Taubmans One Coat ceiling paint has been specifically formulated to cover most ceilings in one coat.

Handy Hint #6

How to Apply

Surface Preparation Ensure surfaces to be painted are clean, dry and free of contamination. Walls should be wiped down with a mild detergent and rinsed clean with fresh water, even if they don't appear to be dirty, to ensure removal of any surface contamination and ensure the paint has a clean surface to adhere to.
New Work Seal new or bare plaster with Taubmans Prep Right Plaster Sealer. Seal bare wallboards or Gyprock with Taubmans Ultraprep or Taubmans 3 in 1.
Repaint Remove all loose or flaking paint, wash all areas thoroughly to remove any surface contamination. Treat surfaces affected by mould with chlorine bleach diluted one part bleach to four parts water. Rinse clean with fresh water. Spot repair any bare areas such as filled holes as per directions for new work.
Coats Apply one liberal coat and recoat if required after two hours.
Clean Up Water wash up, away from drains.
Coverage Up to 16m²/litre, depending on nature of surface. Coverage will be lower on rough or absorbent surfaces.
Recoat Recoat after 2 hours at 25°C and 50% relative humidity.
Stirring Stir paint with a 25mm wide flat stirrer in a circular lifting motion for at least 5 minutes before use. It is always recommended to stir paint before use to ensure that the colour tints are dispersed evenly throughout the paint.
Temperature Do not use at temperatures below 10°C, above 35°C or when humidity is excessive.