How to Prepare a Wall

Walls act as the canvas for your vision of a room.

To make it easier for you to paint and ensure the colours appear as you expected them to, it’s vital that you adequately prepare your interior walls for painting.

Download PDF Print

Estimated Time

An hour to a day
Depends on wall size and the amount of flaws it has.

Materials

Here's what you're going to need:

  • Canvas drop cloths
  • Bucket of soapy water
  • Sponge
  • Bleach
  • Scraper
  • Sand Paper 180 or 240 grade
  • Pre-mixed filler
  • Gap sealant
  • Filling blades
  • Painter’s masking tape

Steps

  1. Remove any fixtures, such as picture hooks and light switch covers.
  2. Place drop cloths on floors and on any furnishings that must remain in the room.
  3. Wash walls with a soapy solution (a small amount of detergent in a bucket of water) to get rid of any dust. Rinse the walls to remove any traces of soap and allow time to dry. This means the paint will adhere to the wall, not the dust.
  4. Assess the walls for any damage or surface lumps and bumps.
  5. If any mould is present, use a bleach solution to remove it from walls. Carefully apply the bleach solution to walls using a sponge and leave to soak for 15 minutes. Rinse thoroughly and again, allow them to dry completely.
  6. If existing paint is peeling or flaking, scrape back the area to remove the loose paint and then gently sand the surface so no edges of the old paint are obvious.
  7. Fill any dents or nail holes in the walls with pre-mixed filler, using filling blades.
  8. Use acrylic gap sealant for cracks or gaps in areas where there may be movement e.g. near doors and windows.
  9. Once the fillers and sealers have set, sand down these areas. While you’re there, sand down any rough or shiny spots to improve adhesion and finish.
  10. Spot prime the filled areas with Taubmans 3 in 1 sealer primer undercoat.
  11. To finish, apply painter’s masking tape to fittings which can’t be removed and any edges which may be fiddly and difficult to paint around, such as skirting boards and fixed shelving.
  12. Once your wall is prepared, you're ready to get started. Let's go paint!

 

Pro Tips

  • For a really effective finish, apply a coat of Taubmans 3 in 1 sealer primer undercoat to the entire wall. This allows for good adhesion and blocks out dark or existing colours, making it easier to paint over, providing a smoother and more professional looking top coat.
  • Remember you’ll need to add a few more materials to the list to complete this step. You’ll need:
    • A 230 or 270mm paint roller frame
    • A matching roller cover with a 9-12mm nap
    • A matching paint tray
    • A roller pole