My Shopping List Use the Paint Calculator to add the required amount of paint to your shopping list.

ENDURE Exterior

ENDURE Exterior

Available in: Gloss, Semi-Gloss, Low Sheen, Matt

Gloss
Ideal for weatherboards, trim and roofs. Gloss Level 70-75%. Not suitable for the collection of drinking water.
Low Sheen
Ideal for weatherboards, trims and roofs. Gloss Level 5-10%. Not suitable for the collection of drinking water.
Matt
Ideal for exterior walls, masonry, outdoor furniture and pergolas. Gloss Level 4%. Not suitable for the collection of drinking water.
Semi Gloss
Ideal for weatherboards, trim and roofs. Best match to Colorbond®. Gloss Level 20-25%. Not suitable for the collection of drinking water.

Surface Preparation
Ensure surfaces to be painted are clean, dry and free of contamination. In hot and windy conditions or when painting very absorbent surfaces, dampen the surface with water before painting.
New Work
Timber - Weathered (greyed) timber must be sanded to original timber surface. Tannin rich timbers such as cedar should be primed with Taubmans Prep Right Wood Primer or Taubmans 3 in 1
Galvanised Iron - Thoroughly degrease new surfaces. Weathered surfaces should be thoroughly cleaned before painting. For structural galvanised iron, abrade with 240# paper to remove chemical treatments and allow full adhesion.
Cement Render/Concrete - Allow concrete, cement render and mortar to cure for 28 days before painting.
Steel - Remove rust and prime with Taubmans Prep Right Iron and Steel Primer or White Knight Metal Primer.
Coats
Apply two liberal coats by brush, roller or spray. Do not overspread. Keep brushes and rollers working freely by rinsing occasionally in clean water.
Clean Up
Water, away from drains.
Coverage
Up to 16m²/litre, depending on nature of surface. Coverage will be lower on rough or absorbent surfaces.
Recoat
Recoat after 2 hours at 25°C and 50% relative humidity.
Stirring
Stir paint with a 25mm wide flat stirrer in a circular lifting motion for at least 5 minutes before use.
Temperature
Do not use at temperatures below 10°C, above 35°C or when humidity is excessive.

Nanoguard Technology
Nanoguard Technology

The reason why Taubmans Endure with Nanoguard® is superior to other paints is because it has small & large particles that form a strong protective barrier, providing your walls with maximum protection against all weather conditions.

It’s got everything you need for your walls to be protected:

  • Superior Weather protection
  • Tough & Durable
  • Resists Mould & Mildew
  • UV Protection
  • Dirt Resistant

That’s why it’s the paint that is Engineered to Endure™.