Living Proof Silk Semi Gloss
Advanced Flow Modifiers
Ease of application, good flow, minimal roller splatter
Contains Teflon® Micropowder
Superior serviceability, washability, stain and burnish resistance.
Ideal for repainting air conditioned buildings
Special Resin System
Low flame spread compliance suitable for commercial use - tested to AS1530.3
Low residual odour during drying
Extensive colour range. Refer to Taubmans Consumer or Architectural/Specifier Colour Systems.
Drying And Recoating
Normally dries in 30 minutes and may be recoated after 2 hours (at 25°C and 50% relative humidity). Note - Drying time may be lengthened in damp, cold or humid conditions.
Semi Gloss (25%) as per AS2311
Ensure adequate ventilation during use.
APAS 0260/2, AS3730.2
Early Fire Hazard Properties - AS1530.3
Ignitability Index 0 Spread of Flame Index 0 Heat Evolved Index 0 Smoke Developed Index 2
Not recommended for use in two coat systems on new work. Do not use abrasive cleaners on the paint finish
or expose it to excessive steam in the first 48 hours. Remove dirt and grime with a soft cloth, warm water
and mild liquid detergent. Pat dry with a soft cloth.
Apply two liberal coats with a quality brush, roller or spray. A 10mm regular nap roller cover is recommended. Spread paint evenly but do not overspread. Provide adequate ventilation during use.
Up to 16m²/litre. Coverage will be lower on rough or absorbent surfaces.
Recoat after 2 hours at 25°C and 50% relative humidity.
Stir paint with a 25mm wide flat stirrer in a circular lifting motion for at least 5 minutes before use.
Do not use at temperatures below 10°C, above 35°C or when humidity is above 85%