My Shopping List Use the Paint Calculator to add the required amount of paint to your shopping list.

1 Paint + Prime

1 Paint + Prime

Available in: Low Sheen

*Conditions apply.

Low Sheen
Ideal for all interior walls. Gloss Level 5-10%

Coats over

  • New or repaired plasterboard and timber
  • Aged enamel
  • Dark colours

Surface Preparation
Surfaces must be clean, dry and free from all surface contamination and dust. Treat mould with bleach then rinse with clean water. Fill in the surface defects with suitable filler or sealant. Avoid using masking tape on wall and ceiling paints. Sand plasterboard joins to obtain a smooth uniform surface.
Repaint
Remove all loose and flaking paint and ensure the surface is clean and dry. Lightly sand glossy or enamel surfaces.
Coats
Apply two coats by brush or roller.
Clean up
Water wash up.
Coverage
Up to 16m²/litre, depending on nature of surface. Coverage will be lower on rough or absorbent surfaces.
Recoat
Recoat after 2 hours at 25°C (allow 4 hrs in cold or humid areas).
Stirring
Stir paint with a 25mm wide flat stirrer in a circular lifting motion for at least 5 minutes before use. It is always recommended to stir paint before use to ensure that the colour tints are dispersed evenly throughout the paint.
Temperature
Do not use at temperatures below 10°C or above 35°C.