Substrate Guide

Substrate Type Finish Coat Profile 1st Coat 2nd Coat 3rd Coat
(1) Off Form Concrete High Build A/W Primer A/W Trowel-On 2mm A/W Satin
High Build A/W Primer A/W Mediterranean A/W Satin
Low Build A/W Primer A/W Satin A/W Satin
Low Build A/W Santa Fe A/W Santa Fe
Low Build A/W Primer A/W Villa Sands A/W Satin
(2) Cement Render High Build A/W Primer A/W Trowel-On 2mm A/W Satin
High Build A/W Primer A/W Mediterranean A/W Satin
Low Build A/W Primer A/W Satin A/W Satin
Low Build A/W Santa Fe A/W Santa Fe
Low Build A/W Primer A/W Villa Sands A/W Satin
(3) Harditex/ Blueboard High Build A/W Primer A/W Trowel-On 2mm A/W Satin
High Build A/W Primer A/W Mediterranean A/W Satin
Low Build A/W Poly Render A/W Satin A/W Satin
Low Build A/W Poly Render A/W Santa Fe A/W Santa Fe
Low Build A/W Poly Render A/W Villa Sands A/W Satin
(4) Tilt Slab Concrete High Build A/W Sealer Bonder A/W Trowel-On 2mm A/W Satin
High Build A/W Sealer Bonder A/W Mediterranean A/W Satin
Low Build A/W Sealer Bonder A/W Satin A/W Satin

Please refer to individual data sheet for comprehensive performance/application guide.

Notes:

(i) Tilt-Slab - always prime with Armawall Sealer/Bonder thinned 30-50% with GTA007.
(ii) Spreading rates will vary with roughness and porosity of the surface.
(iii) Armawall Primer and Sealer/Bonder are always thinned for application - see Data Sheet.
(iv) B = Brush, R = Roller, TR = Texture Roller, T = Trowel, S = Spray, M = Mitt.
(v) Smooth Face Bricks - Always prime with Moroka Treatment Coat.