Interior Flat

Medium Black Texture Roller

Datasheet Number: D213

A high build acrylic coating that is usually applied to interior or undercover ceilings and soffits, producing a high build stipple finish. Recommended for defect hiding on gyprock and off form concrete ceilings.

Product Overview

Description

A high build acrylic coating that is usually applied to interior or undercover ceilings and soffits, producing a high build stipple finish.

Uses

Plasterboard, cement render, AAC panels, concrete and fibre cement interior or undercover surfaces. Recommended for Defect hiding on ceilings.

Features & Benefits

Flexible

Copes with normal substrate movement.

Minimal gloss

Excellent for broad ceilings.

Stipple finish

Hides surface defects.

Technical

Colour Range

Available in white and colours tintable from white.

Drying Time
4 Hours. Note: This may be lengthened in damp, cold or humid conditions. Do not apply at temperatures below 10°C

Odour

Low

Profile

Low or medium featuring fine stipple peaks.

Spread Rate

2m2/litre

Surface Preparation

New cement render, masonry and concrete surfaces

New cement render, masonry and concrete surfaces should be allowed to cure for 28 days. Off form concrete should be thoroughly cleaned by acid etching, water or sand blasting to ensure all bond breaker oils are removed. All surfaces should be primed with Armawall Primer (thinned 50-100% with water) prior to the application of Armawall Interior Flat. Seal tilt slab concrete with Armawall Sealer/ Bonder to ensure adhesion of topcoats.

Previously painted surfaces – in sound condition

Previously painted surfaces in sound condition should be scrubbed down with detergent and fresh water, fresh water washed and allowed to dry. Surface irregularities such as blow holes and profile defects may require patching with Armawall Filler or Patch prior to system application.

Application

Armawall Interior Flat is normally applied by airless spray to achieve the high build required. To obtain the desired level of texture, the wet coat is laid off with the appropriate texture roller. The product may also be applied directly as a two coat system.

Cleanup

Water, away from drains and watercourses.

Stirring

Stir Armawall Interior Flat prior to use.

Temperature

Avoid application when temperature is below 10°C and above 35°C.