Mediterranean
Spaghetti Roller
Datasheet Number: D231
A tough acrylic texture coating containing 0.8mm aggregate that produces a roughened, render-like effect. Ideal for smooth masonry surfaces, such as recessed edge fibre cement.
Product Overview
Description
A tough acrylic texture coating that produces a roughened, render-like effect.
Uses
Exterior cement render, concrete, fibre cement sheeting, AAC panels and blocks, bricks and blockwork.
Features & Benefits
Durable
Excellent weatherproofing and impact resistance.
Economical
Can be applied as a single, tinted coat over Armawall Primer (see Application).
Flexible
Copes with normal substrate movement.
Matt finish
Contemporary finish that minimises surface imperfections.
Water vapour permeable
Allows substrate to breathe.
Technical
Colour Range
Available in a wide range of colours
Dry Film Thickness
0.8mm to 1.0mm
Drying Time
Armawall Primer 2 Hours. Armawall Mediterranean 24 Hours. Armawall Satin 4 Hours (7 days full curing). Note: This may be lengthened in damp, cold or humid conditions. Do not apply at temperatures below 10°C.
Odour
Low
Profile
Low
Spread Rate
1m2/litre
Surface Preparation
New cement render, masonry and concrete surfaces
New cement render, masonry and concrete surfaces should be allowed to cure for 28 days. Off form concrete should be thoroughly cleaned by acid etching, water or sand blasting to ensure all bond breaker oils are removed. All masonry surfaces should be primed with Armawall Primer (thinned 50-100% with water) prior to the application of Armawall Mediterranean. Seal tilt slab concrete and CFC with Armawall Sealer/ Bonder thinned 50% with GTA007 to ensure adhesion of topcoats.
Previously painted surfaces – in sound condition
Previously painted surfaces in sound condition should be scrubbed down with detergent and fresh water, fresh water washed and allowed to dry.
Previously painted enamel surfaces
Previously painted enamel surfaces should be undercoated with Taubmans Tradecoat. Surface irregularities such as blow holes and profile defects may require patching with Armawall Filler or Patch prior to system application.
Application
This product is generally applied with a steel trowel and finished off with a plastic float or sponge. Rough or uneven surfaces may require a second trowel application or a topcoat of Armawall Satin. Product can also be sprayed or applied with a roller for different finish effects.
Cleanup
Water, away from drains and watercourses.
Stirring
Stir Armawall Mediterranean prior to use.
Temperature
Avoid application when temperature is below 10°C and above 35°C.