Sand

Spaghetti Roller

Datasheet Number: D228

A premium, heavy duty, acrylic, roller applied, texture finish with fine aggregates. Most common applications include off form, pre-cast and tilt slab concrete.

Product Overview

Description

A heavy duty acrylic roller applied texture finish with fine aggregates.

Uses

Exterior cement render, concrete, fibre cement sheeting, bricks and blockwork.

Features & Benefits

Contains aggregates

Hides minor surface defects.

Flexible

Copes with normal substrate movement.

Technical

Colour Range

Available in a wide range of colours

Drying Time

Armawall Primer 2 Hours. Armawall Sand 4 Hours (7 days full curing). Note: This may be lengthened in damp, cold or humid conditions. Do not apply at temperatures below 10°C.

Odour

Low

Profile

Medium

Spread Rate

2m2/litre

Surface Preparation

New cement render, masonry and concrete surfaces

New cement render, masonry and concrete surfaces should be allowed to cure for 28 days. Off form concrete should be thoroughly cleaned by acid etching, water or sand blasting to ensure all bond breaker oils are removed. All masonry surfaces should be primed with Armawall Primer (thinned 50-100% with water) prior to the application of Armawall Sand. Seal tilt slab concrete and CFC with Armawall Sealer/Bonder thinned 50% with GTA007 to ensure adhesion of topcoats.

Previously painted surfaces – in sound condition

Previously painted surfaces in sound condition should be scrubbed down with detergent and fresh water, fresh water washed and allowed to dry.

Previously painted enamel surfaces

Previously painted enamel surfaces should be undercoated with Taubmans Tradecoat. Surface irregularities such as blow holes and profile defects may require patching with Armawall Filler or Patch prior to system application.

Application

Armawall Sand should be applied in two coats using a texture roller. A black mesh roller will provide a medium profile or spaghetti roller will provide a high profile.

Cleanup

Water, away from drains and watercourses.

Stirring

Stir Armawall Sand prior to use.

Temperature

Avoid application when temperature is below 10°C and above 35°C.