Moroka

Datasheet Number: D191

A durable exterior acrylic designed to give a medium profile “bag and paint” effect and bridge hairline cracks in masonry surfaces. May be applied by “mitt” to create special decorative bag and paint effects. Resists efflorescence when used in combination with Moroka Wall Treatment. Recommended for use on flush mortar brick walls. Also suitable for concrete and cement render. Not suitable for timber surfaces.

Product Overview

Description
A durable exterior acrylic designed to give a medium profile "bag and paint" effect. Moroka Bag and Paint also bridges hairline cracks in masonry surfaces. May be applied by “mitt” to create special decorative bag and paint effects. Resists efflorescence when used in combination with Moroka Wall Treatment.

Uses
Use on flush mortar brick walls. Also suitable for concrete and cement render. DO NOT use on timber suraces.

Features & Benefits

Acrylic binder
Long life exterior exposure.

Cement free
Reduced efflorescence.

Medium texture profile
Contemporary bag and paint finish.

Technical

Colour Range	Available in a range of colours.
Drying Time	4 hours. Note: This may be lengthened in damp, cold or humid conditions. Do not apply at temperatures below 10C.
Odour	Low
Profile	Low
Spread Rate	Varies depending on surface and application.

Surface Preparation

Surface irregularities such as blow holes and profile defects may require patching with Armawall Filler or Patch prior to system application. CAUTION: When applying Moroka Bag and Paint on large or unbroken high rise off form concrete, you will not easily be able to maintain a wet edge. This can cause overlaps to stand out.

New cement render, masonry and concrete
Should be allowed to cure for 28 days. Moroka Bag and Paint must be applied over Moroka Wall Treatment to give maximum resistance to efflorescence.

Off-form cement
Should be thoroughly cleaned by acid etching, water or sand blasting to ensure all bond breaker oils are removed. Moroka Bag and Paint must be applied over Moroka Wall Treatment to give maximum resistance to efflorescence.

Previously painted surfaces – in Sound Condition
Should be scrubbed down with detergent and fresh water, fresh water washed and allowed to dry.

Application

Apply 1 or 2 coats as required of Moroka Bag and Paint using a long nap roller. To create bag and paint effect, move mit in circular motion.

Cleanup
Water, away from drains and watercourses.

Stirring
Stir Moroka Bag and Paint prior to use.

Temperature
Avoid application when temperature is below 10°C and above 35°C.