Armawall Pearl –

Spaghetti Roller

Datasheet Number: D206

A high build texture coating system that contains no aggregates. It is rolled on to give a bold texture or then layed off to give a “plateau” flattened finish. Ideal for masonry surfaces including recessed edge fibre cement.

Product Overview

Description
A high build texture coating system, rolled on to give a bold texture or then layed off to give a “plateau” flattened finish.

Uses
Exterior cement render, concrete, fibre cement sheeting, AAC panels and blocks, bricks and blockwork.

Features & Benefits

Bold Profile
Bridges hairline cracks

Flexible
Copes with normal substrate movement

High Build
Covers irregular substrates, reducing time and cost of patching

Technical

Colour Range	Available in a wide range of colours
Dry Film Thickness	Variable, according to profile required
Drying Time	Armawall Primer 2 Hours. Armawall Pearl 72 Hours. Armawall Satin 4 Hours (7 days full curing). Note: This may be lengthened in damp, cold or humid conditions. Do not apply at temperatures below 10°C.
Odour	Low
Profile	High
Spread Rate	0.7m2/litre

Surface Preparation

New cement render, masonry and concrete surfaces
New cement render, masonry and concrete surfaces should be allowed to cure for 28 days. Off form concrete should be thoroughly cleaned by acid etching, water or sand blasting to ensure all bond breaker oils are removed. All masonry surfaces should be primed with Armawall Primer (thinned 50-100% with water) prior to the application of Armawall Pearl. Seal tilt slab concrete with Armawall Sealer/ Bonder to ensure adhesion of topcoats.

Previously painted surfaces – in sound condition
Previously painted surfaces in sound condition should be scrubbed down with detergent and fresh water, fresh water washed and allowed to dry.

Previously painted enamel surfaces
Previously painted enamel surfaces should be undercoated with Taubmans Tradecoat. Surface irregularities such as blow holes and profile defects may require patching with Armawall Filler or Patch prior to system application.

Application

This product is generally applied with a spaghetti roller and the peaks are layed off (or flattened) with a plastic triangle.

Cleanup
Water, away from drains and watercourses

Stirring
Stir Armawall Pearl prior to use

Temperature
Avoid application when temperature is below 10°C and above 35°C