Armawall Verona –

Spaghetti Roller tipped off with triangle

Datasheet Number: 229

A tough acrylic texture coating that produces a subtle, sandstone effect. Designed for applications including smooth masonry surfaces, such as recessed edge fibre cement.

Product Overview

Description
A tough acrylic texture coating that produces a subtle, sandstone effect.

Uses
Exterior cement render, concrete, fibre cement sheeting, AAC panels and blocks, bricks and blockwork.

Features & Benefits

Durable
Excellent impact resistance.

Economical
Can be applied as a single, coloured coat over Armawall Primer on suitable surfaces.

Flexible
Copes with normal substrate movement.

Matt finish
Contemporary finish that minimises surface imperfections.

Water vapour permeable
Allows substrate to breathe.

Technical

Colour Range	Available in a wide range of colours.
Dry Film Thickness	0.6mm to 0.8mm.
Drying Time	Armawall Primer 2 Hours. Armawall Verona 24 Hours. Armawall Satin 4 Hours (7 days full curing). Note: This may be lengthened in damp, cold or humid conditions. Do not apply at temperatures below 10°C.
Odour	Low
Profile	Low
Spread Rate	1.4m2/litre.

Surface Preparation

New cement render, masonry and concrete surfaces
New cement render, masonry and concrete surfaces should be allowed to cure for 28 days. Off form concrete should be thoroughly cleaned by acid etching, water or sand blasting to ensure all bond breaker oils are removed. All masonry surfaces should be primed with Armawall Primer (thinned 50-100% with water) prior to the application of Armawall Verona. Seal tilt slab concrete and CFC with Armawall Sealer/Bonder thinned 50% with GTA007 to ensure adhesion of topcoats.

Previously painted surfaces – in sound condition
Previously painted surfaces in sound condition should be scrubbed down with detergent and fresh water, fresh water washed and allowed to dry.

Previously painted enamel surfaces
Previously painted enamel surfaces should be undercoated with Taubmans Tradex Tradecoat. Verona will not cover high spots on uneven surfaces in one coat with trowel application. Surface irregularities such as blow holes and profile defects may require skimming with Armawall Filler or Patch prior to system application.

Application

This product is generally applied as one or two coats with a steel trowel and finished off with a plastic float or sponge. Two coats may be necessary to cover high spots on uneven surfaces. Product can also be sprayed or applied with a roller for different finish effects.

Cleanup
Water, away from drains and watercourses.

Stirring
Stir Armwall Verona prior to use.

Temperature
Avoid application when temperature is below 10°C and above 35°C.