Endure Doors & Trims

Ideal for all doors, skirting boards, windows and architraves. Gloss Level 80%

Surface Preparation
Ensure surfaces to be painted are clean, dry and free of contamination. Walls should be wiped down with a mild detergent and rinsed clean with fresh water, even if they don't appear to be dirty, to ensure removal of any surface contamination and ensure the paint has a clean surface to adhere to.
New Work
Seal new or bare plaster with Taubmans Prep Right Plaster Sealer. Seal bare wallboards or Gyprock with Taubmans Ultraprep or Taubmans 3 in 1.
Remove all loose or flaking paint, wash all areas thoroughly to remove any surface contamination. Treat surfaces affected by mould with chlorine bleach diluted one part bleach to four parts water. Rinse clean with fresh water. Spot repair any bare areas such as filled holes as per directions for new work.
Apply two liberal coats by brush, roller or spray. Do not overspread. Keep brushes and rollers working freely by rinsing occasionally in clean water.
Clean up
Water wash up, away from drains.
Up to 16m²/litre, depending on nature of surface. Coverage will be lower on rough or absorbent surfaces.
Recoat after 2 hours at 25°C and 50% relative humidity.
Stir paint with a 25mm wide flat stirrer in a circular lifting motion for at least 5 minutes before use. It is always recommended to stir paint before use to ensure that the colour tints are dispersed evenly throughout the paint.
Do not use at temperatures below 10°C, above 35°C or when humidity is excessive.

Asthma Council Approved
Asthma Council Approved

Taubmans Endure Interior and Taubmans EasyCoat Walls have both been approved by the National Asthma Council Australia's Sensitive Choice Program. Products approved by the Sensitive Choice Program may help people with asthma and allergies.

Superior Technology
Superior Technology


Laboratory testing has proven that Taubmans Endure Interior with Nanoguard has superior performance in stain and scrub resistance. Endure performs two times better than a leading competitor brand against scrubbing, and it also provides excellent protection against the growth of mould and mildew.

Advanced Nanoguard Technology

Taubmans Endure® Interior is engineered with Nanoguard Advanced Technology, which provides maximum protection for interior surfaces against everyday dirt and stains. The interlocking molecular structure utilises small and large particles to form a strong protective shield, so the surface can be cleaned without compromising the quality of the paint.