Ideal for weatherboards, trim and roofs. Gloss Level 70-75%. Not suitable for the collection of drinking water.
Low Sheen
Ideal for weatherboards, trims and roofs. Gloss Level 5-10%. Not suitable for the collection of drinking water.
Ideal for exterior walls, masonry, outdoor furniture and pergolas. Gloss Level 4%. Not suitable for the collection of drinking water.
Semi Gloss
Ideal for weatherboards, trim and roofs. Best match to Colorbond®. Gloss Level 20-25%. Not suitable for the collection of drinking water.

Surface Preparation
Ensure surfaces to be painted are clean, dry and free of contamination. In hot and windy conditions or when painting very absorbent surfaces, dampen the surface with water before painting.
New Work
Timber - Weathered (greyed) timber must be sanded to original timber surface. Tannin rich timbers such as cedar should be primed with Taubmans Prep Right Wood Primer or Taubmans 3 in 1
Galvanised Iron - Thoroughly degrease new surfaces. Weathered surfaces should be thoroughly cleaned before painting. For structural galvanised iron, abrade with 240# paper to remove chemical treatments and allow full adhesion.
Cement Render/Concrete - Allow concrete, cement render and mortar to cure for 28 days before painting.
Steel - Remove rust and prime with Taubmans Prep Right Iron and Steel Primer or White Knight Metal Primer.
Apply two liberal coats by brush, roller or spray. Do not overspread. Keep brushes and rollers working freely by rinsing occasionally in clean water.
Clean Up
Water, away from drains.
Up to 16m²/litre, depending on nature of surface. Coverage will be lower on rough or absorbent surfaces.
Recoat after 2 hours at 25°C and 50% relative humidity.
Stir paint with a 25mm wide flat stirrer in a circular lifting motion for at least 5 minutes before use.
Do not use at temperatures below 10°C, above 35°C or when humidity is excessive.

Nanoguard Technology
Nanoguard® Advanced Technology

Taubmans Endure is engineered with Nanoguard® Advance, which provides maximum protection for your walls. It has an interlocking molecular structure that creates a protective shield so everyday dirt and stains can be wiped away without compromising the quality of the paint. It provides excellent mould and mildew protection so you have a cleaner and healthier home environment. It is one of the most advanced paint technologies available today.